local device = {}
device.model = "E2134"
device.vendor = "IKEA"
device.description = "VALLHORN wireless motion sensor"
device.zigbeeModel = { "VALLHORN Wireless Motion Sensor" }

device.exposes = {
        {
            type = "binary",
            name = "occupancy",
            property = "occupancy",
            access = 5,
            value_on = true,
            value_off = false,
            description = "Indicates whether the device detected occupancy",
        },
        {
            type = "numeric",
            name = "illuminance",
            property = "illuminance",
            access = 5,
            unit = "lx",
            description = "Measured illuminance",
        },
        {
            type = "enum",
            name = "identify",
            property = "identify",
            access = 2,
            description = "Initiate device identification. This device is asleep by default.You may need to wake it up first before sending the identify command.",
            category = "config",
            values = { "identify" },
        },
        {
            type = "numeric",
            name = "battery",
            property = "battery",
            access = 5,
            unit = "%",
            min = 0,
            max = 100,
            description = "Remaining battery in %",
            category = "diagnostic",
        },
        {
            type = "numeric",
            name = "voltage",
            property = "voltage",
            access = 5,
            unit = "mV",
            description = "Reported battery voltage in millivolts",
            category = "diagnostic",
        },
        {
            type = "binary",
            name = "contact",
            property = "contact",
            access = 1,
            value_on = false,
            value_off = true,
            description = "Indicates if the contact is closed or open",
        },
        {
            type = "binary",
            name = "tamper",
            property = "tamper",
            access = 1,
            value_on = true,
            value_off = false,
            description = "Indicates whether the device is tampered",
        },
        {
            type = "binary",
            name = "battery_low",
            property = "battery_low",
            access = 1,
            value_on = true,
            value_off = false,
            description = "Indicates if the battery of this device is almost empty",
            category = "diagnostic",
        },
    }

device.fromZigbee = { "occupancy", "illuminance", "battery", "ias_zone", "electrical" }

device.configure = {
    bind = { "msOccupancySensing", "msIlluminanceMeasurement", "genPowerCfg", "ssIasZone", "haElectricalMeasurement" },
    reporting = {
        {
            cluster = "msOccupancySensing",
            attribute = "occupancy",
            min = 0,
            max = 3600,
            change = 0,
        },
        {
            cluster = "msIlluminanceMeasurement",
            attribute = "measuredValue",
            min = 10,
            max = 3600,
            change = 5,
        },
        {
            cluster = "genPowerCfg",
            attribute = "batteryPercentageRemaining",
            min = 3600,
            max = 65000,
            change = 0,
        },
        {
            cluster = "genPowerCfg",
            attribute = "batteryVoltage",
            min = 3600,
            max = 65000,
            change = 0,
        },
        {
            cluster = "haElectricalMeasurement",
            attribute = "activePower",
            min = 5,
            max = 3600,
            change = 1,
        },
        {
            cluster = "haElectricalMeasurement",
            attribute = "rmsVoltage",
            min = 5,
            max = 3600,
            change = 5,
        },
        {
            cluster = "haElectricalMeasurement",
            attribute = "rmsCurrent",
            min = 5,
            max = 3600,
            change = 100,
        },
    },
}

return device