local device = {}
device.model = "QASZP"
device.vendor = "QA"
device.description = "Power sensor"

device.exposes = {
        {
            type = "numeric",
            name = "voltage",
            property = "voltage",
            access = 1,
            unit = "V",
            description = "Measured electrical potential value",
        },
        {
            type = "numeric",
            name = "current",
            property = "current",
            access = 1,
            unit = "A",
            description = "Instantaneous measured electrical current",
        },
        {
            type = "numeric",
            name = "power",
            property = "power",
            access = 1,
            unit = "W",
            description = "Instantaneous measured power",
        },
        {
            type = "numeric",
            name = "energy",
            property = "energy",
            access = 1,
            unit = "kWh",
            description = "Sum of consumed energy",
        },
        {
            type = "numeric",
            name = "reactive_power_threshold",
            property = "reactive_power_threshold",
            access = 3,
            unit = "W",
            min = 3,
            max = 30,
            value_step = 0.1,
            description = "Reactive power threshold. Switch turns on when real power exceeds this value",
        },
        {
            type = "numeric",
            name = "max_effective_power",
            property = "max_effective_power",
            access = 3,
            unit = "W",
            min = 0,
            max = 4800,
            description = "Maximum effective power supported",
        },
        {
            type = "enum",
            name = "status_report",
            property = "status_report",
            access = 3,
            description = "Enable threshold monitoring",
            values = { "ON", "OFF" },
        },
        {
            type = "enum",
            name = "switch_status",
            property = "switch_status",
            access = 1,
            description = "Switch status",
            values = { "ON", "OFF" },
        },
    }

device.fromZigbee = { "electrical", "metering" }

device.tuyaDatapoints = {
    { dp = 17, name = "energy", converter = "divideBy1000" },
    { dp = 18, name = "current", converter = "divideBy1000" },
    { dp = 19, name = "power", converter = "divideBy10" },
    { dp = 20, name = "voltage", converter = "divideBy10" },
    { dp = 101, name = "reactive_power_threshold", converter = "divideBy10" },
    { dp = 102, name = "max_effective_power", converter = "divideBy10" },
    { dp = 104, name = "status_report", converter = "onOff" },
    { dp = 105, name = "switch_status", converter = "onOff" },
}

device.configure = {
    bind = { "haElectricalMeasurement", "seMetering" },
    reporting = {
        {
            cluster = "haElectricalMeasurement",
            attribute = "activePower",
            min = 5,
            max = 3600,
            change = 1,
        },
        {
            cluster = "haElectricalMeasurement",
            attribute = "rmsVoltage",
            min = 5,
            max = 3600,
            change = 5,
        },
        {
            cluster = "haElectricalMeasurement",
            attribute = "rmsCurrent",
            min = 5,
            max = 3600,
            change = 100,
        },
        {
            cluster = "seMetering",
            attribute = "currentSummDelivered",
            min = 5,
            max = 3600,
            change = 1,
        },
    },
}

device.fingerprint = {
    {
        model = "TS011F",
        manufacturer = "_TZ3218_kwht8j5m",
    },
}

return device