local device = {}
device.model = "E8332SRY800ZB_NEW"
device.vendor = "Schneider Electric"
device.description = "Wiser AvatarOn 2G onoff switch"
device.zigbeeModel = { "A3N32SR800ZB_xx_C1" }

-- Indicator mode lives in the Visa configuration cluster (0xFC04),
-- attribute indicatorMode (0x0002, UINT8), Schneider manufacturer code 0x105E.
-- Value lookup (matches z2m visaIndicatorMode([0,1,2,3])):
--   reverse_with_load=0, consistent_with_load=1, always_off=2, always_on=3
local INDICATOR_FROM = { [0] = "reverse_with_load", [1] = "consistent_with_load",
                         [2] = "always_off", [3] = "always_on" }
local INDICATOR_TO = { reverse_with_load = 0, consistent_with_load = 1,
                       always_off = 2, always_on = 3 }

device.exposes = {
        {
            type = "switch",
            endpoint = "l1",
            features = {
                {
                    type = "binary",
                    name = "state",
                    property = "state_l1",
                    access = 7,
                    value_on = "ON",
                    value_off = "OFF",
                    description = "On/off state of the switch",
                    endpoint = "l1",
                },
            },
        },
        {
            type = "switch",
            endpoint = "l2",
            features = {
                {
                    type = "binary",
                    name = "state",
                    property = "state_l2",
                    access = 7,
                    value_on = "ON",
                    value_off = "OFF",
                    description = "On/off state of the switch",
                    endpoint = "l2",
                },
            },
        },
        {
            type = "enum",
            name = "indicator_mode",
            property = "indicator_mode",
            access = 7,
            description = "Set indicator mode for switch",
            category = "config",
            values = { "reverse_with_load", "consistent_with_load", "always_off", "always_on" },
        },
    }

device.fromZigbee = {
    "on_off",
    {
        -- Visa configuration cluster: reflect indicator mode reported by the
        -- device (e.g. changed externally). NOTE: the Lua fromZigbee msg does
        -- not carry the attribute id, so we guard on the valid value range.
        cluster = 0xFC04,
        convert = function(msg)
            if not msg.is_attribute then return nil end
            local v = msg.payload and msg.payload[1]
            local mode = v and INDICATOR_FROM[v]
            if mode == nil then return nil end
            return { indicator_mode = mode }
        end,
    },
}

device.toZigbee = {
    "on_off",
    {
        key = "indicator_mode",
        convert = function(value, endpoint)
            local n = INDICATOR_TO[value]
            if n == nil then return nil end
            return {
                cluster = 0xFC04,
                endpoint = 10,          -- device-level setting, written on the first gang
                isAttribute = true,
                attrId = 0x0002,         -- indicatorMode
                attrType = 0x20,         -- UINT8
                manufacturerCode = 0x105E, -- Schneider Electric
                payload = { n },
            }
        end,
    },
}

device.configure = {
    bind = { "genOnOff" },
    reporting = {
        {
            cluster = "genOnOff",
            attribute = "onOff",
            min = 0,
            max = 3600,
            change = 0,
        },
    },
}

device.meta = { multiEndpoint = true }
device.endpoint = {
    l1 = 10,
    l2 = 11,
}

return device