local device = {}
device.model = "SPM01V2.5"
device.vendor = "Tuya"
device.description = "Smart energy monitor for 1P+N system"

device.exposes = {
        {
            type = "numeric",
            name = "voltage",
            property = "voltage",
            access = 1,
            unit = "V",
            description = "Measured electrical potential value",
        },
        {
            type = "numeric",
            name = "power",
            property = "power",
            access = 1,
            unit = "W",
            description = "Instantaneous measured power",
        },
        {
            type = "numeric",
            name = "current",
            property = "current",
            access = 1,
            unit = "A",
            description = "Instantaneous measured electrical current",
        },
        {
            type = "numeric",
            name = "energy",
            property = "energy",
            access = 1,
            unit = "kWh",
            description = "Total forward active energy",
        },
        {
            type = "numeric",
            name = "produced_energy",
            property = "produced_energy",
            access = 1,
            unit = "kWh",
            description = "Total reverse active energy",
        },
        {
            type = "numeric",
            name = "power_factor",
            property = "power_factor",
            access = 1,
            unit = "%",
            description = "Instantaneous measured power factor",
        },
        {
            type = "numeric",
            name = "ac_frequency",
            property = "ac_frequency",
            access = 1,
            unit = "Hz",
            description = "Measured electrical AC frequency",
        },
        {
            type = "numeric",
            name = "data_report_duration",
            property = "data_report_duration",
            access = 2,
            min = 5,
            max = 3600,
            description = "WARNING: You must update device firmware to V3.2.2 before changing this setting! Use Tuya gateway/app to update firmware. Data report duration set (Threshold value range 30~3600 seconds)",
        },
    }

device.fromZigbee = { "electrical", "metering" }

device.tuyaDatapoints = {
    { dp = 1, name = "energy", converter = "divideBy100" },
    { dp = 23, name = "produced_energy", converter = "divideBy100" },
    { dp = 32, name = "ac_frequency", converter = "divideBy100" },
    { dp = 50, name = "power_factor", converter = "raw" },
    { dp = 102, name = "voltage", converter = "divideBy10" },
    { dp = 103, name = "current", converter = "divideBy1000" },
    { dp = 104, name = "power", converter = "raw" },
}

device.configure = {
    bind = { "haElectricalMeasurement", "seMetering" },
    reporting = {
        {
            cluster = "haElectricalMeasurement",
            attribute = "activePower",
            min = 5,
            max = 3600,
            change = 1,
        },
        {
            cluster = "haElectricalMeasurement",
            attribute = "rmsVoltage",
            min = 5,
            max = 3600,
            change = 5,
        },
        {
            cluster = "haElectricalMeasurement",
            attribute = "rmsCurrent",
            min = 5,
            max = 3600,
            change = 100,
        },
        {
            cluster = "seMetering",
            attribute = "currentSummDelivered",
            min = 5,
            max = 3600,
            change = 1,
        },
    },
}

device.fingerprint = {
    {
        model = "TS0601",
        manufacturer = "_TZE200_iwn0gpzz",
    },
    {
        model = "TS0601",
        manufacturer = "_TZE204_iwn0gpzz",
    },
    {
        model = "TS0601",
        manufacturer = "_TZE284_iwn0gpzz",
    },
}

return device