local device = {}
device.model = "TE-1Z"
device.vendor = "Tuya"
device.description = "Floor heating thermostat"

device.exposes = {
        {
            type = "binary",
            name = "state",
            property = "state",
            access = 3,
            value_on = "ON",
            value_off = "OFF",
            description = "Turn system on or standby mode",
        },
        {
            type = "climate",
            features = {
                {
                    type = "numeric",
                    name = "current_heating_setpoint",
                    property = "current_heating_setpoint",
                    access = 3,
                    unit = "°C",
                    min = 5,
                    max = 35,
                    value_step = 0.5,
                    description = "Temperature setpoint",
                },
                {
                    type = "enum",
                    name = "running_state",
                    property = "running_state",
                    access = 1,
                    description = "The current running state",
                    values = { "idle", "heat" },
                },
                {
                    type = "enum",
                    name = "preset",
                    property = "preset",
                    access = 3,
                    description = "Mode of this device (similar to system_mode)",
                    values = { "auto", "manual", "mixed" },
                },
                {
                    type = "numeric",
                    name = "local_temperature_calibration",
                    property = "local_temperature_calibration",
                    access = 3,
                    unit = "°C",
                    min = -9,
                    max = 9,
                    value_step = 1,
                    description = "Offset to add/subtract to the local temperature",
                },
                {
                    type = "numeric",
                    name = "local_temperature",
                    property = "local_temperature",
                    access = 1,
                    unit = "°C",
                    description = "Current temperature measured on the device",
                },
            },
        },
        {
            type = "binary",
            name = "child_lock",
            property = "child_lock",
            access = 3,
            value_on = "LOCK",
            value_off = "UNLOCK",
            description = "Enables/disables physical input on the device",
        },
        {
            type = "enum",
            name = "sensor_mode",
            property = "sensor_mode",
            access = 1,
            description = "IN - internal sensor, no heat protection. OU - external sensor, no heat protection. AL - internal sensor for room temperature, external for heat protection",
            values = { "IN", "OU", "AL" },
        },
        {
            type = "binary",
            name = "high_temperature_protection_state",
            property = "high_temperature_protection_state",
            access = 3,
            value_on = "ON",
            value_off = "OFF",
            description = "If temperature hit the HIGH temperature limit, it will turn off heating until it drops for amount of deadzone/hysteresis degrees",
        },
        {
            type = "binary",
            name = "low_temperature_protection_state",
            property = "low_temperature_protection_state",
            access = 3,
            value_on = "ON",
            value_off = "OFF",
        },
        {
            type = "numeric",
            name = "high_temperature_protection_setting",
            property = "high_temperature_protection_setting",
            access = 3,
            unit = "°C",
            min = 20,
            max = 70,
            description = "Alarm temperature max",
        },
        {
            type = "numeric",
            name = "low_temperature_protection_setting",
            property = "low_temperature_protection_setting",
            access = 3,
            unit = "°C",
            min = 1,
            max = 10,
            description = "Alarm temperature min",
        },
        {
            type = "numeric",
            name = "temperature_sensor",
            property = "temperature_sensor",
            access = 1,
            unit = "°C",
            description = "Floor temperature from external sensor",
        },
        {
            type = "numeric",
            name = "deadzone_temperature",
            property = "deadzone_temperature",
            access = 3,
            unit = "°C",
            min = 1,
            max = 9,
            value_step = 1,
            description = "Hysteresis",
        },
        {
            type = "numeric",
            name = "max_temperature",
            property = "max_temperature",
            access = 3,
            unit = "°C",
            min = 20,
            max = 70,
            description = "Maximum temperature",
        },
        {
            type = "numeric",
            name = "error_status",
            property = "error_status",
            access = 1,
            description = "Error status",
        },
    }

device.tuyaDatapoints = {
    { dp = 16, name = "local_temperature", converter = "divideBy10" },
    { dp = 50, name = "current_heating_setpoint", converter = "divideBy10" },
    { dp = 102, name = "running_state", converter = "lookup" },
    { dp = 103, name = "temperature_sensor", converter = "divideBy10" },
    { dp = 106, name = "high_temperature_protection_state", converter = "onOff" },
    { dp = 107, name = "low_temperature_protection_state", converter = "onOff" },
    { dp = 109, name = "local_temperature_calibration", converter = "localTempCalibration3" },
    { dp = 110, name = "temperature_return_difference", converter = "raw" },
    { dp = 111, name = "deadzone_temperature", converter = "raw" },
    { dp = 112, name = "high_temperature_protection_setting", converter = "raw" },
    { dp = 113, name = "low_temperature_protection_setting", converter = "raw" },
    { dp = 114, name = "max_temperature", converter = "raw" },
    { dp = 116, name = "sensor_mode", converter = "lookup",
        lookup = { IN = 0, OU = 1, AL = 2 } },
    { dp = 125, name = "system_mode", converter = "onOff" },
    { dp = 125, name = "state", converter = "onOff" },
    { dp = 128, name = "preset", converter = "lookup",
        lookup = { manual = 0, auto = 1, mixed = 3 } },
    { dp = 129, name = "child_lock", converter = "lockUnlock" },
    { dp = 130, name = "error_status", converter = "raw" },
}

device.fingerprint = {
    {
        model = "TS0601",
        manufacturer = "_TZE284_khah2lkr",
    },
}

return device