local device = {}
device.model = "TS0301"
device.vendor = "Tuya"
device.description = "Cover motor"
device.zigbeeModel = { "TS0301" }

device.exposes = {
        {
            type = "numeric",
            name = "battery",
            property = "battery",
            access = 5,
            unit = "%",
            min = 0,
            max = 100,
            description = "Remaining battery in %",
            category = "diagnostic",
        },
        {
            type = "cover",
            features = {
                {
                    type = "enum",
                    name = "state",
                    property = "state",
                    access = 3,
                    values = { "OPEN", "CLOSE", "STOP" },
                },
                {
                    type = "numeric",
                    name = "position",
                    property = "position",
                    access = 3,
                    unit = "%",
                    min = 0,
                    max = 100,
                    description = "Position of this cover",
                },
            },
        },
        {
            type = "enum",
            name = "reverse_direction",
            property = "reverse_direction",
            access = 3,
            values = { "forward", "back" },
            description = "Reverse the motor direction",
        },
    }

-- Tuya MCU datapoint device (cluster 0xEF00). The standard window-covering
-- cluster (0x0102) advertised in the endpoint descriptor is non-functional on
-- these _TZE2xx_ motors; control and reporting both go through datapoints.
device.tuyaDatapoints = {
    { dp = 1, name = "state", converter = "lookup",
        lookup = { OPEN = 0, CLOSE = 1, STOP = 2 } },
    { dp = 2, name = "position", converter = "coverPosition" },
    { dp = 3, name = "position", converter = "coverPosition" },
    { dp = 5, name = "reverse_direction", converter = "lookup",
        lookup = { forward = 0, back = 1 } },
}

-- Battery is still reported over the standard genPowerCfg cluster.
device.fromZigbee = { "battery" }

-- Wake the Tuya MCU on configure so it starts reporting its datapoints.
device.tuya = { magicPacket = true }

device.configure = {
    bind = { "genPowerCfg" },
    reporting = {
        {
            cluster = "genPowerCfg",
            attribute = "batteryPercentageRemaining",
            min = 3600,
            max = 65000,
            change = 0,
        },
        {
            cluster = "genPowerCfg",
            attribute = "batteryVoltage",
            min = 3600,
            max = 65000,
            change = 0,
        },
    },
}

return device