local device = {}
device.model = "TS0601_din_3"
device.vendor = "Tuya"
device.description = "Zigbee DIN energy meter"

device.exposes = {
        {
            type = "switch",
            features = {
                {
                    type = "binary",
                    name = "state",
                    property = "state",
                    access = 3,
                    value_on = "ON",
                    value_off = "OFF",
                    description = "On/off state of the switch",
                },
            },
        },
        {
            type = "numeric",
            name = "energy",
            property = "energy",
            access = 1,
            unit = "kWh",
            description = "Sum of consumed energy",
        },
        {
            type = "numeric",
            name = "produced_energy",
            property = "produced_energy",
            access = 1,
            unit = "kWh",
            description = "Sum of produced energy",
        },
        {
            type = "numeric",
            name = "power",
            property = "power",
            access = 1,
            unit = "W",
            description = "Instantaneous measured power",
        },
        {
            type = "numeric",
            name = "voltage",
            property = "voltage",
            access = 1,
            unit = "V",
            description = "Measured electrical potential value",
        },
        {
            type = "numeric",
            name = "current",
            property = "current",
            access = 1,
            unit = "A",
            description = "Instantaneous measured electrical current",
        },
        {
            type = "enum",
            name = "fault",
            property = "fault",
            access = 1,
            description = "Fault status of the device (clear = nothing)",
            values = { "clear", "over_current_threshold", "over_power_threshold", "over_voltage threshold", "wrong_frequency_threshold" },
        },
        {
            type = "enum",
            name = "threshold_1",
            property = "threshold_1",
            access = 1,
            description = "State of threshold_1",
            values = { "not_set", "over_current_threshold", "over_voltage_threshold" },
        },
        {
            type = "binary",
            name = "threshold_1_protection",
            property = "threshold_1_protection",
            access = 1,
            value_on = "ON",
            value_off = "OFF",
            description = "OFF - alarm only, ON - relay will be off when threshold reached",
        },
        {
            type = "numeric",
            name = "threshold_1_value",
            property = "threshold_1_value",
            access = 1,
            description = "Can be in Volt or Ampere depending on threshold setting. Setup the value on the device",
        },
        {
            type = "enum",
            name = "threshold_2",
            property = "threshold_2",
            access = 1,
            description = "State of threshold_2",
            values = { "not_set", "over_current_threshold", "over_voltage_threshold" },
        },
        {
            type = "binary",
            name = "threshold_2_protection",
            property = "threshold_2_protection",
            access = 1,
            value_on = "ON",
            value_off = "OFF",
            description = "OFF - alarm only, ON - relay will be off when threshold reached",
        },
        {
            type = "numeric",
            name = "threshold_2_value",
            property = "threshold_2_value",
            access = 1,
            description = "Setup value on the device",
        },
        {
            type = "binary",
            name = "clear_fault",
            property = "clear_fault",
            access = 3,
            value_on = "ON",
            value_off = "OFF",
            description = "Turn ON to clear last the fault",
        },
        {
            type = "text",
            name = "meter_id",
            property = "meter_id",
            access = 1,
            description = "Meter ID (ID of device)",
        },
    }

device.fromZigbee = { "metering", "electrical" }

device.tuyaDatapoints = {
    { dp = 1, name = "energy", converter = "divideBy100" },
    { dp = 2, name = "produced_energy", converter = "divideBy100" },
    { dp = 10, name = "fault", converter = "lookup",
        lookup = { clear = 0, over_current_threshold = 1, over_power_threshold = 2, over_voltage_threshold = 4, wrong_frequency_threshold = 8 } },
    { dp = 16, name = "state", converter = "onOff" },
    { dp = 18, name = "meter_id", converter = "raw" },
    { dp = 20, name = "clear_fault", converter = "onOff" },
}

device.configure = {
    bind = { "seMetering", "haElectricalMeasurement" },
    reporting = {
        {
            cluster = "seMetering",
            attribute = "currentSummDelivered",
            min = 5,
            max = 3600,
            change = 1,
        },
        {
            cluster = "haElectricalMeasurement",
            attribute = "activePower",
            min = 5,
            max = 3600,
            change = 1,
        },
        {
            cluster = "haElectricalMeasurement",
            attribute = "rmsVoltage",
            min = 5,
            max = 3600,
            change = 5,
        },
        {
            cluster = "haElectricalMeasurement",
            attribute = "rmsCurrent",
            min = 5,
            max = 3600,
            change = 100,
        },
    },
}

device.fingerprint = {
    {
        model = "TS0601",
        manufacturer = "_TZE200_rhblgy0z",
    },
    {
        model = "TS0601",
        manufacturer = "_TZE204_rhblgy0z",
    },
}

return device