local device = {}
device.model = "ZG-204ZL"
device.vendor = "Tuya"
device.description = "Luminance motion sensor"
device.zigbeeModel = { "ZG-204ZL" }

device.exposes = {
        {
            type = "binary",
            name = "occupancy",
            property = "occupancy",
            access = 1,
            value_on = true,
            value_off = false,
            description = "Indicates whether the device detected occupancy",
        },
        {
            type = "numeric",
            name = "illuminance",
            property = "illuminance",
            access = 1,
            unit = "lx",
            description = "Measured illuminance",
        },
        {
            type = "numeric",
            name = "battery",
            property = "battery",
            access = 1,
            unit = "%",
            min = 0,
            max = 100,
            description = "Remaining battery in %, can take up to 24 hours before reported",
            category = "diagnostic",
        },
        {
            type = "enum",
            name = "sensitivity",
            property = "sensitivity",
            access = 3,
            description = "PIR sensor sensitivity (refresh and update only while active)",
            values = { "low", "medium", "high" },
        },
        {
            type = "enum",
            name = "keep_time",
            property = "keep_time",
            access = 3,
            description = "PIR keep time in seconds (refresh and update only while active)",
            values = { "10", "30", "60", "120" },
        },
        {
            type = "numeric",
            name = "illuminance_interval",
            property = "illuminance_interval",
            access = 3,
            unit = "minutes",
            min = 1,
            max = 720,
            value_step = 1,
            description = "Brightness acquisition interval (refresh and update only while active)",
        },
        {
            type = "binary",
            name = "contact",
            property = "contact",
            access = 1,
            value_on = false,
            value_off = true,
            description = "Indicates if the contact is closed or open",
        },
        {
            type = "binary",
            name = "tamper",
            property = "tamper",
            access = 1,
            value_on = true,
            value_off = false,
            description = "Indicates whether the device is tampered",
        },
        {
            type = "binary",
            name = "battery_low",
            property = "battery_low",
            access = 1,
            value_on = true,
            value_off = false,
            description = "Indicates if the battery of this device is almost empty",
            category = "diagnostic",
        },
    }

device.fromZigbee = { "occupancy", "ias_zone", "illuminance", "battery" }

device.tuyaDatapoints = {
    { dp = 1, name = "occupancy", converter = "trueFalse0" },
    { dp = 4, name = "battery", converter = "raw" },
    { dp = 9, name = "sensitivity", converter = "lookup",
        lookup = { low = 0, medium = 1, high = 2 } },
    { dp = 10, name = "keep_time", converter = "lookup",
        lookup = { 10 = 0, 30 = 1, 60 = 2, 120 = 3 } },
    { dp = 12, name = "illuminance", converter = "raw" },
    { dp = 101, name = "illuminance", converter = "raw" },
    { dp = 102, name = "illuminance_interval", converter = "raw" },
}

device.configure = {
    bind = { "msOccupancySensing", "ssIasZone", "msIlluminanceMeasurement", "genPowerCfg" },
    reporting = {
        {
            cluster = "msOccupancySensing",
            attribute = "occupancy",
            min = 0,
            max = 3600,
            change = 0,
        },
        {
            cluster = "msIlluminanceMeasurement",
            attribute = "measuredValue",
            min = 10,
            max = 3600,
            change = 5,
        },
        {
            cluster = "genPowerCfg",
            attribute = "batteryPercentageRemaining",
            min = 3600,
            max = 65000,
            change = 0,
        },
        {
            cluster = "genPowerCfg",
            attribute = "batteryVoltage",
            min = 3600,
            max = 65000,
            change = 0,
        },
    },
}

return device