local device = {}
device.model = "ZG-204ZM"
device.vendor = "Tuya"
device.description = "PIR 24Ghz human presence sensor"
device.zigbeeModel = { "ZG-204ZM" }

device.exposes = {
        {
            type = "binary",
            name = "presence",
            property = "presence",
            access = 1,
            value_on = true,
            value_off = false,
            description = "Indicates whether the device detected presence",
        },
        {
            type = "enum",
            name = "motion_state",
            property = "motion_state",
            access = 1,
            description = "Motion state",
            values = { "none", "large", "small", "static" },
        },
        {
            type = "numeric",
            name = "battery",
            property = "battery",
            access = 1,
            unit = "%",
            min = 0,
            max = 100,
            description = "Remaining battery in %, can take up to 24 hours before reported",
            category = "diagnostic",
        },
        {
            type = "numeric",
            name = "fading_time",
            property = "fading_time",
            access = 3,
            unit = "s",
            min = 0,
            max = 28800,
            value_step = 1,
            description = "Presence keep time",
        },
        {
            type = "numeric",
            name = "static_detection_distance",
            property = "static_detection_distance",
            access = 3,
            unit = "m",
            min = 0,
            max = 6,
            value_step = 0.01,
            description = "Static detection distance",
        },
        {
            type = "numeric",
            name = "static_detection_sensitivity",
            property = "static_detection_sensitivity",
            access = 3,
            min = 0,
            max = 10,
            value_step = 1,
            description = "Static detection sensitivity",
        },
        {
            type = "binary",
            name = "indicator",
            property = "indicator",
            access = 3,
            value_on = "ON",
            value_off = "OFF",
            description = "LED indicator mode",
        },
        {
            type = "enum",
            name = "motion_detection_mode",
            property = "motion_detection_mode",
            access = 3,
            description = "Motion detection mode (Firmware version>=0122052017)",
            values = { "only_pir", "pir_and_radar", "only_radar" },
        },
        {
            type = "numeric",
            name = "motion_detection_sensitivity",
            property = "motion_detection_sensitivity",
            access = 3,
            min = 0,
            max = 10,
            value_step = 1,
            description = "Motion detection sensitivity (Firmware version>=0122052017)",
        },
        {
            type = "numeric",
            name = "illuminance",
            property = "illuminance",
            access = 5,
            unit = "lx",
            description = "Measured illuminance",
        },
        {
            type = "binary",
            name = "occupancy",
            property = "occupancy",
            access = 1,
            value_on = true,
            value_off = false,
            description = "Indicates whether the device detected occupancy",
        },
        {
            type = "binary",
            name = "contact",
            property = "contact",
            access = 1,
            value_on = false,
            value_off = true,
            description = "Indicates if the contact is closed or open",
        },
        {
            type = "binary",
            name = "tamper",
            property = "tamper",
            access = 1,
            value_on = true,
            value_off = false,
            description = "Indicates whether the device is tampered",
        },
        {
            type = "binary",
            name = "battery_low",
            property = "battery_low",
            access = 1,
            value_on = true,
            value_off = false,
            description = "Indicates if the battery of this device is almost empty",
            category = "diagnostic",
        },
    }

device.fromZigbee = { "illuminance", "ias_zone", "occupancy", "battery" }

device.tuyaDatapoints = {
    { dp = 1, name = "presence", converter = "trueFalse1" },
    { dp = 2, name = "static_detection_sensitivity", converter = "raw" },
    { dp = 4, name = "static_detection_distance", converter = "divideBy100" },
    { dp = 101, name = "motion_state", converter = "lookup",
        lookup = { none = 0, large = 1, small = 2, static = 3 } },
    { dp = 102, name = "fading_time", converter = "raw" },
    { dp = 106, name = "illuminance", converter = "raw" },
    { dp = 107, name = "indicator", converter = "onOff" },
    { dp = 121, name = "battery", converter = "raw" },
    { dp = 122, name = "motion_detection_mode", converter = "lookup",
        lookup = { only_pir = 0, pir_and_radar = 1, only_radar = 2 } },
    { dp = 123, name = "motion_detection_sensitivity", converter = "raw" },
}

device.configure = {
    bind = { "msIlluminanceMeasurement", "ssIasZone", "msOccupancySensing", "genPowerCfg" },
    reporting = {
        {
            cluster = "msIlluminanceMeasurement",
            attribute = "measuredValue",
            min = 10,
            max = 3600,
            change = 5,
        },
        {
            cluster = "msOccupancySensing",
            attribute = "occupancy",
            min = 0,
            max = 3600,
            change = 0,
        },
        {
            cluster = "genPowerCfg",
            attribute = "batteryPercentageRemaining",
            min = 3600,
            max = 65000,
            change = 0,
        },
        {
            cluster = "genPowerCfg",
            attribute = "batteryVoltage",
            min = 3600,
            max = 65000,
            change = 0,
        },
    },
}

return device