local device = {}
device.model = "ZY-M100-24G"
device.vendor = "Tuya"
device.description = "24G MmWave radar human presence motion sensor"

device.exposes = {
        {
            type = "enum",
            name = "state",
            property = "state",
            access = 1,
            description = "Presence state",
            values = { "none", "presence", "move" },
        },
        {
            type = "binary",
            name = "presence",
            property = "presence",
            access = 1,
            value_on = true,
            value_off = false,
            description = "Indicates whether the device detected presence",
        },
        {
            type = "numeric",
            name = "distance",
            property = "distance",
            access = 1,
            unit = "m",
            description = "Target distance",
        },
        {
            type = "numeric",
            name = "illuminance",
            property = "illuminance",
            access = 1,
            unit = "lx",
            description = "Measured illuminance",
        },
        {
            type = "numeric",
            name = "motion_sensitivity",
            property = "motion_sensitivity",
            access = 3,
            min = 1,
            max = 10,
            value_step = 1,
            description = "Motion sensitivity",
            category = "config",
        },
        {
            type = "numeric",
            name = "presence_sensitivity",
            property = "presence_sensitivity",
            access = 3,
            min = 1,
            max = 10,
            value_step = 1,
            description = "Presence sensitivity",
            category = "config",
        },
        {
            type = "numeric",
            name = "max_range",
            property = "max_range",
            access = 3,
            unit = "m",
            min = 1.5,
            max = 5.5,
            value_step = 1,
            description = "Maximum range",
            category = "config",
        },
        {
            type = "numeric",
            name = "presence_timeout",
            property = "presence_timeout",
            access = 3,
            unit = "s",
            min = 1,
            max = 1500,
            value_step = 1,
            description = "Presence timeout",
        },
        {
            type = "binary",
            name = "occupancy",
            property = "occupancy",
            access = 1,
            value_on = true,
            value_off = false,
            description = "Indicates whether the device detected occupancy",
        },
        {
            type = "binary",
            name = "contact",
            property = "contact",
            access = 1,
            value_on = false,
            value_off = true,
            description = "Indicates if the contact is closed or open",
        },
        {
            type = "binary",
            name = "tamper",
            property = "tamper",
            access = 1,
            value_on = true,
            value_off = false,
            description = "Indicates whether the device is tampered",
        },
        {
            type = "binary",
            name = "battery_low",
            property = "battery_low",
            access = 1,
            value_on = true,
            value_off = false,
            description = "Indicates if the battery of this device is almost empty",
            category = "diagnostic",
        },
    }

device.fromZigbee = { "ias_zone", "occupancy", "illuminance" }

device.tuyaDatapoints = {
    { dp = 112, name = "presence", converter = "trueFalse1" },
    { dp = 106, name = "motion_sensitivity", converter = "divideBy10FromOnly" },
    { dp = 111, name = "presence_sensitivity", converter = "divideBy10FromOnly" },
    { dp = 107, name = "max_range", converter = "divideBy100" },
    { dp = 109, name = "distance", converter = "divideBy100" },
    { dp = 110, name = "presence_timeout", converter = "raw" },
    { dp = 104, name = "illuminance", converter = "raw" },
    { dp = 102, name = "illuminance_treshold_max", converter = "raw" },
    { dp = 103, name = "illuminance_treshold_min", converter = "raw" },
    { dp = 105, name = "state", converter = "lookup",
        lookup = { none = 0, presence = 1, move = 2 } },
}

device.configure = {
    bind = { "ssIasZone", "msOccupancySensing", "msIlluminanceMeasurement" },
    reporting = {
        {
            cluster = "msOccupancySensing",
            attribute = "occupancy",
            min = 0,
            max = 3600,
            change = 0,
        },
        {
            cluster = "msIlluminanceMeasurement",
            attribute = "measuredValue",
            min = 10,
            max = 3600,
            change = 5,
        },
    },
}

device.meta = { multiEndpoint = true }

device.fingerprint = {
    {
        model = "TS0601",
        manufacturer = "_TZE204_ijxvkhd0",
    },
}

return device