local device = {}
device.model = "rtsc11r"
device.vendor = "Tuya"
device.description = "5.8G human presence sensor with relay"

device.exposes = {
        {
            type = "binary",
            name = "presence",
            property = "presence",
            access = 1,
            value_on = true,
            value_off = false,
            description = "Indicates whether the device detected presence",
        },
        {
            type = "numeric",
            name = "illuminance",
            property = "illuminance",
            access = 1,
            unit = "lx",
            description = "Measured illuminance",
        },
        {
            type = "numeric",
            name = "detection_delay",
            property = "detection_delay",
            access = 3,
            unit = "s",
            min = 0,
            max = 10,
            value_step = 0.1,
            description = "Detection delay",
        },
        {
            type = "numeric",
            name = "detection_distance",
            property = "detection_distance",
            access = 1,
            unit = "cm",
            min = 0,
            max = 1000,
            value_step = 1,
            description = "Distance of detected person",
        },
        {
            type = "numeric",
            name = "sensitivity",
            property = "sensitivity",
            access = 3,
            min = 0,
            max = 10,
            value_step = 1,
            description = "Detection sensitivity",
        },
        {
            type = "numeric",
            name = "keep_time",
            property = "keep_time",
            access = 3,
            unit = "s",
            min = 5,
            max = 3600,
            value_step = 1,
            description = "Detection keep time",
        },
        {
            type = "numeric",
            name = "minimum_range",
            property = "minimum_range",
            access = 3,
            unit = "m",
            min = 0,
            max = 1000,
            value_step = 50,
            description = "Minimum detection range",
        },
        {
            type = "numeric",
            name = "maximum_range",
            property = "maximum_range",
            access = 3,
            unit = "m",
            min = 50,
            max = 1000,
            value_step = 50,
            description = "Maximum detection range",
        },
        {
            type = "binary",
            name = "occupancy",
            property = "occupancy",
            access = 1,
            value_on = true,
            value_off = false,
            description = "Indicates whether the device detected occupancy",
        },
        {
            type = "binary",
            name = "contact",
            property = "contact",
            access = 1,
            value_on = false,
            value_off = true,
            description = "Indicates if the contact is closed or open",
        },
        {
            type = "binary",
            name = "tamper",
            property = "tamper",
            access = 1,
            value_on = true,
            value_off = false,
            description = "Indicates whether the device is tampered",
        },
        {
            type = "binary",
            name = "battery_low",
            property = "battery_low",
            access = 1,
            value_on = true,
            value_off = false,
            description = "Indicates if the battery of this device is almost empty",
            category = "diagnostic",
        },
    }

device.fromZigbee = { "ias_zone", "occupancy", "illuminance" }

device.tuyaDatapoints = {
    { dp = 1, name = "presence", converter = "trueFalse1" },
    { dp = 12, name = "detection_delay", converter = "divideBy10" },
    { dp = 19, name = "detection_distance", converter = "raw" },
    { dp = 20, name = "illuminance", converter = "raw" },
    { dp = 101, name = "sensitivity", converter = "divideBy10" },
    { dp = 102, name = "keep_time", converter = "raw" },
    { dp = 111, name = "minimum_range", converter = "divideBy100" },
    { dp = 112, name = "maximum_range", converter = "divideBy100" },
}

device.configure = {
    bind = { "ssIasZone", "msOccupancySensing", "msIlluminanceMeasurement" },
    reporting = {
        {
            cluster = "msOccupancySensing",
            attribute = "occupancy",
            min = 0,
            max = 3600,
            change = 0,
        },
        {
            cluster = "msIlluminanceMeasurement",
            attribute = "measuredValue",
            min = 10,
            max = 3600,
            change = 5,
        },
    },
}

device.fingerprint = {
    {
        model = "TS0601",
        manufacturer = "_TZE204_mhxn2jso",
    },
}

return device